This medical gas alarm is housed in an ABS Bopad enclosure. The wall mounted Plant Alarm Controller will monitor and control your entire Hospital Plant Room, including VIE bulk tanks, Inter-stage pressures, Medical Air Plant, Vacuum Plant, Dew Point and individual pipeline pressures. Any other control point, whether it’s a 4-20Ma output, Voltage Free (VF) Contact, Medbus® or Modbus®, the MT-PAC can monitor it.

The MT-PAC can fully read the MT-APN16 Medbus® signal of the Meditek Systems legacy equipment and display all the available information.

The full colour 10.1” touchscreen displays the entire plant with the pressure or status at each individual monitoring point and will indicate the pressure, level or condition by way of a green or flashing red display. The layout is fully customisable using existing animated images or actual photographic representations. Additional mimic (Slave) panels, normally installed in the hospital, can be connected via the Modbus2® built-in interface.

During an alarm condition an audible buzzer is activated which can be manually muted. The visual alarm will however continue to indicate a fault until such time as the fault is rectified. The audible alarm is re-activated should an additional alarm condition occur.

Operating from a standard 110/230V ac supply, the system uses a 12VDC power supply to supply the sensors and the control unit.

Option ancillary modules include:

• Modbus® output / BMS signal
• Bluetooth accessibility
• Data logging
• Mobile App (Apilert®)
• Battery Backup Power